Milltech Marine logo  

AIS RECEIVERS  Click here for a comparison chart ...

AIS-2-NMEA

Comar AIS-2-NMEA AIS Receiver

The AIS-2-NMEA Receiver is a low cost, dual channel parallel AIS Receiver. AIS Targets are displayed on a Chart Plotter giving the user a clear picture of other vessels within VHF range. This AIS solution is ideal for use with a chart plotter that requires a NMEA AIS connection.
More info ...

Sale Price: $369
Click here to order ...

AIS-2-USB

Comar AIS-2-USB AIS Receiver

The AIS-2-NMEA Receiver is a low cost, dual channel parallel AIS Receiver specifically designed for use with a computer. This AIS uses a USB connection to the computer for both passing AIS information and for powering the AIS receiver.
More info ...

Sale Price: $399
Click here to order ...

SLR 200

Comar SLR 200 / SLR 200G / SLR 200N / SLR 200NG AIS Receivers

The SLR 200 is dual channel parallel AIS Receiver, designed specifically for the professional, fishing boat, leisure marine and vessel monitoring markets. The SLR 200G option is fitted with an internal GPS receiver.
The SLR 200N is a dual channel IP addressable Ethernet AIS Receiver, designed specifically for the larger vessel or for shore side monitoring. The SLR 200NG option is fitted with an internal GPS receiver. Note: to use the internal GPS in the G models, the Comar AG 100 GPS Antenna is required and must be ordered separately.
More info ...

SLR 200: $499 ($589 for SLR 200G version)
SLR 200N: $579 ($669 for SLR 200NG version)

Click here to order ...


    Click here for larger image

Smart Radio SR161 AIS Receiver

The Smart Radio SR161 AIS Receiver is a compact, easy to install, stand alone marine receiver that monitors the channels assigned to the Automatic Identification System or AIS. This radio receiver is specially built for recreational marine environments for the intended use of deciphering Automatic Identification System data. The AIS system uses two VHF channels for broadcasting ship information. The SR161 can receive one channel at a time but is designed to scan both AIS channels and automatically use the channel with the best signal.
The SR161 is designed to be used with computer-based navigation solutions using a standard RS232 serial port interface.
More info ...

Sale Price: $189
Click here to order ...


Click here for larger image

Smart Radio SR162 AIS Receiver

The Smart Radio SR162 AIS Receiver is similar to the SR161 AIS Receiver but this unit is designed for environments that require full time monitoring of both AIS channels. The SR162 is also the most appropriate device for use in areas where Class B AIS transponders are in use.
The SR162 is a dual channel receiver and is able to receive AIS information on the two approved AIS channels simultaneously.
More info ...

Sale Price: $399
Click here to order ...

SR162G
Click here for larger image

Smart Radio SR162G AIS/GPS Receiver

The Smart Radio SR162G AIS/GPS Receiver is similar to the SR162 AIS Receiver but this unit includes an integrated 12 channel GPS receiver and an external GPS antenna.
The SR162G is a dual channel AIS receiver and is able to receive AIS information on the two approved AIS channels simultaneously. The single serial port provides a consolidated data stream with AIS vessel information and GPS position information.
More info ...

Sale Price: $459
Click here to order ...

AIS TRANSPONDERS (Class A and Class B)

ACR Nauticast B Class B AIS Transponder

ACR Nauticast-B Class B AIS Transponder Kit

The ACR Nauticast-B transponder is a plug and play AIS solution. Enjoy the benefits of the AIS system knowing larger commercial vessels are aware of your position increasing your personal safety while navigating at sea.   Unlike receive only AIS devices which do not transmit vessel information to surrounding traffic, the Nauticast-B system allows you to virtually participate in neighboring vessels maneuvering activities for collision avoidance. Announce your identity, position, speed and course over ground to oncoming traffic allows for increased security that you will be seen in low visibility conditions.
More info ...

Sale Price: $749 - includes GPS antenna, VHF antenna & device pre-programming!
Click here to order ...

CSB200

Comar CSB 200 Class B AIS Transponder Kit

The CSB 200 is a low cost AIS Class B Transponder designed specifically for the small commercial boat, fishing boat and leisure markets enabling the vessel not only to receive AIS broadcasts for surrounding vessels but also to transmit AIS information and therefore be ”seen” by surrounding traffic.
NOTE: This product is not yet approved for use in the USA.
More info ...

Sale price:  $699 - includes external GPS antenna
Call or email Milltech Marine for information on ordering this product

ACR Nauticast2 Workboat Class A AIS Transponder Kit

The ACR Nauticast2 AIS Transponder is a class A unit that is specifically designed to fulfill non-SOLAS carriage requirements. This product is packaged in an All-in-One kit that includes the AIS transponder, VHF and GPS antennas, data cables, and pivot mounting kit. An ECDIS port adapter is included which can directly interface with your ECDIS display or marine navigation package. The system can be ordered for use with 12vDC or 24vDC power.
More info ...

Sale price for a complete kit:  $2,699
Click here to order ...

Nauticast SOLAS

ACR Nauticast SOLAS Class A AIS Transponders

The ACR Nauticast AIS Transponder family are class A units that fully comply with the IMO technical specifications for the Universal Automatic Identification System (AIS) Transponder. These Transponders are specifically designed for all commercial vessels which are subject to the SOLAS regulations.
This fully self-contained unit is ideal for commercial vessels which are subject to the SOLAS regulations.
More info ...

Complete custom packages start at around $3,000
Call or email Milltech Marine for information on a package to meet your needs

VHF ANTENNA SPLITTERS

ASR 100

Comar ASR 100 VHF Antenna Splitter

The ASR 100 Antenna Splitter is designed to allow an AIS receiver to share the existing VHF marine antenna with the vessel's VHF Radio.
More info ...

Sale Price: $119
Click here to order ...

AST 100

Comar AST 100 VHF Antenna Splitter

The AST 100 Class B AIS VHF Antenna splitter is designed to simplify installation of a Class B Automatic Identification Systems (AIS) transponder allowing an AIS device and an FM radio to share the existing VHF marine antenna with the vessel's VHF Radio. This product works well with the ACR Nauticast-B Class B AIS Transponder. Note that an PL259-BNC Female Adapter is required for use with the ACR Nauticast-B unit.
More info ...

Sale Price: $329
Click here to order ...


Click here for larger image

Smart Radio VHF Antenna Splitter

The Smart Radio VHF Antenna Splitter allows you to safely share a single VHF antenna between an AIS receiver and a VHF radio that is used for both receiving and transmitting. This active splitter will isolate the antenna connection to the AIS receiver if a transmission from the VHF radio is detected on the same antenna.
This is a great alternative solution for situations where it is not possible to have a dedicated VHF antenna for the AIS receiver.
More info ...

Sale Price: $119
Click here to order ...

AIS-RELATED ACCESSORIES

AISWatchMate

AISWatchMate Collision Warning System 

The AISWatchMate display device provides you with a valuable tool to help avoid collisions at sea. Using the Universal Shipborne Automatic Identification System (AIS) the AISWatchMate displays data from all AIS equipped vessels in your vicinity. Audible warning alarms are sounded if a potentially dangerous situation exists. The AISWatchMate now features a radar-like display for viewing AIS targets.
More info ...
Click here for the AISWatchMate wiring diagram

Now available! Special introductory price:  $469

Get $50.00 off when you purchase an AISWatchMate with one of our AIS Receivers or Transponders.
Click here to order ...

Portable VHF Antenna

This small portable antenna is specially designed to work with the Smart Radio and Comar AIS Receivers.
It is most appropriate for situations where you are not able to connect your AIS receiver to a full size VHF antenna.

Sale Price: $14
Click here to order ...

GlobalSat  BU-353 USB WAAS GPS Receiver

The GlobalSat WAAS-enabled BU-353 GPS Receiver can be utilized in a variety of applications that may require a magnetic mounting with a waterproof configuration. With non-slip on the base and its compact design, the BU-353 is completely self-contained and waterproof. It incorporates the latest SiRF Star III GPS chipset and an active patch antenna so you receive the highest degree of GPS accuracy.
More info ...

Sale Price: $49
Click here to order ...

 

AG 100

Comar AG 100 GPS Antenna

The AG 100 is a GPS antenna for use with the SLR 200G and SLR 200NG variants of Comar’s AIS receivers.

Sale Price: $129
Click here to order ...

Garmin 17HVS

Garmin GPS 17HVS

The rugged GPS 17HVS sensor is designed for marine applications. It is IPX7 waterproof, so it can withstand the elements, and it can be pole mounted or flush mounted. This 12-channel receiver continuously tracks satellites and reports your precise position. It is also WAAS-enabled, so it can determine your precise location to within 3 meters. The GPS 17HVS produces RS-232 data in the industry-standard NMEA 0183 format, so it interfaces easily with laptops or chartplotters.
This is an excellent external GPS for use with the AISWatchMate or AIS Receivers that support multiplexing incoming GPS sentences with AIS sentences.
More info ...

Sale Price: $99
Click here to order ...


Click here for larger image

Keyspan USB Serial Adapter

The Keyspan "High Speed" USB Serial Adapter is an excellent solution for connecting an AIS Receiver or GPS unit to a PC or Mac that has no available serial ports.
This solution has been tested with our AIS Receiver and Transponder product families and is highly recommended.
More info ...

Sale Price: $37
Click here to order ...

 

Keyspan USB 4-port Serial Adapter

The Keyspan USB 4-port Serial Adapter is an excellent solution for connecting multiple serial devices to your navigation PC. For example, ports could be used for multiple inbounds devices such as an AIS Receiver or GPS unit as well as outbound serial repeater ports.
This solution has been tested with our AIS Receiver product family and is highly recommended.
More info ...

Sale Price: $144
Click here to order ...

Smart Radio AIS/GPS Cable

This is a custom manufactured cable that is wired for use with SR161/162 AIS Receivers. This allows you to combine the output sentences from an existing GPS with the AIS receiver sentences and output the combined data stream using a single serial connection to your computer or other device. Note: this cable does not work with other brands of AIS receivers.   
Click here to build your own ...

Sale Price: $14
Click here to order ...

NMEA cable

AIS Receiver Breakout Cable

This 6 foot custom cable can be used for connecting the RS232 interface on an AIS Receiver to a chart plotter or other AIS device. The cable has a male DB9 serial connector on one end (to plug into the AIS receiver) and a cable with three bare wires on the other end. The three wires are labeled IN (pin 3), OUT (pin 2) and GND (pin 5) for connection with an AIS RS232 compatible device. 
We also sell a DB9 female to female adapter for $5 which allows this cable to be used with a computer as well.
NOTE: When used with a computer, the IN lead is connected to the pin 3 OUT and the OUT lead is connected to the pin 2 IN.

Sale Price: $10
Click here to order ...

SO239 to BNC Adapter

Use this adapter to connect a standard VHF antenna cable with a male PL259 connector to the BNC antenna connector on an AIS Receiver.  
Sale Price: $7
Click here to order ...
PL259-BNC

PL259 to BNC Female Adapter

Use this adapter to connect a standard VHF device or cable with a female SO239 connector to a BNC cable. This is the adapter to use to connect an ACR Transponder to a Comar AST 100 Splitter.  
Sale Price: $7
Click here to order ...

ACR AIS-A3200 VHF Marine Antenna

This 3 1/2 foot compact stainless steel whip antenna is specifically designed for AIS equipment. The antenna's features include a 6 dB gain, mounting bracket and a 15 foot cable terminated with a PL259 connector. In order to directly connect this antenna to an AIS receiver you will need the SO239 to BNC Adapter. If you are connecting this to the VHF Antenna Splitter then no additional adapter is required.
Sale Price: $49
Click here to order ...

SOFTWARE PRODUCTS

Rose Point Navigation Systems Coastal Explorer 1.1

Coastal Explorer™ is a sophisticated and full-featured, yet very easy to use navigation software package designed specifically for the pleasure boater.
With support for official raster and vector charts from almost every major hydrographic agency in the world, route planning features with multi-level undo capability, integrated gazetteer and Coast Pilot™ books, virtual instrument display, and obstacle alerts, Coastal Explorer will help you make your next cruise safer and more enjoyable. Coastal Explorer fully supports interpreting data from the Automatic Identification System and works very well with our AIS Receivers.
More info ...

Bundles with an AIS Receiver starting for less than $500!
Click here to order ...

Bookmark
 © 2005-2009 Milltech Marine Inc.